Oswal Genset Care

Additional Information:

• Delivery Time: 5 TO 7 DAYS

Additional Information:

• Delivery Time: 2 to 3 weeks

• Engine: 6-cylinder in-line, 4-stroke, QSN14-G2 / QSM15-G1
• Power Output: 400 kVA (320 kWe) Prime
• Voltage/Frequency: 415 V, 50 Hz, 3 Phase
• Fuel Consumption:
  • 100% Load: ~85-88 L/hr
  • 75% Load: ~61-67 L/hr
• Fuel Tank Capacity: 450 L to 715 L
• Cooling System: Liquid Cooled (EG Compleat 50:50)
• Alternator: Stamford HCI544C/HCI444F (Class H)
• Dimensions (Approx. Silent): 5300-5500 mm (L) x 1900 mm (W) x 2150-2490 mm (H)
• Weight (Approx. Silent): 1706 kg - 5650 kg (varies by model and enclosure) 

• Regulation: 1500 RPM, Turbocharged, CPCB IV+ compliant
• Controller: Deep Sea (DSE7320) or PowerCommand®
• Noise Level: 75 dBA at 1 meter

• Power250 kVA
• DG Set Dimensions ( L X B X H)1128 x 791 x1277
• Bore (mm) x Stroke (mm)114 x 145
• DG Size L x W1128 x 791
• Starter Motor Rated Voltage (Dc)24V

• Engine: 6-cylinder in-line, Turbocharged, Charge Air Cooled, QSM15-G1 1500 RPM 1500 RPM 1500 RPM 1500 RPM.
• Power Output: 380 kVA Prime / 304 kWe 1500 RPM.
• Alternator: Stamford (CGT) HCI444E, IP23, Brushless, H-Class insulation.
• Dimensions (Enclosed): Approx. 5300 mm (L) x 1900 mm (W) x 2490 mm (H).
• Emission Control: Full Authority Electronic Engine with EATS (Exhaust After-treatment System) 1500 RPM.
• Fuel Consumption: Approx. 66.15 L/hr @ 75% load and 84.51 L/hr @ 100% load 1500 RPM

• Engine Model: Cummins QSB4.5-G2 (4-cylinder, in-line, water-cooled).
• Power Output: 125 kVA / 100 kWe.
• Engine Output: 161.6 BHP (approx. ).
• Fuel Consumption: Approx. 20-22 Litres/Hour at 75% load.
• Fuel Tank Capacity: 290-300 Litres.
• Alternator: Stamford brushless, 415V, 0.8 PF, 3 Phase.
• Dimensions (Approx.):  (LxWxH).
• Weight: Approx. 2216 kg.
• Starting System: 12V Electric. 

• Compliance: Fully compliant with CPCB IV+ norms, focusing on reduced emissions (NOx, PM).
• Sound Proofing: Acoustic enclosure with noise levels  at 1m.
• Control Panel: Microprocessor-based, offering remote monitoring and safety shutdown (low oil pressure, high water temp).
• Components: Often supplied by partners like Sudhir or Powerica.
• Service: 500-750 hours/1 year service interval, with up to 5-year extended warranty options

• Engine: Cummins QSB4.5-G3 (4 Cylinder, Liquid Cooled)
• Power Output: 140 kVA / 112 kWe (Prime Power)
• Fuel Consumption: 31.91 L/hr at 100% load; ~25.92 L/hr at 75% load
• Alternator: Stamford (CGT)
• Fuel Tank Capacity: 275 - 290 Liters
• Dimensions (Approx): 
• Weight (Wet): 2260 - 2565 kg
• Compliance: CPCB IV+ (MoEF)
• Control Panel: Cummins PowerStart™ PS0602
• Features: Common Rail Electronic Fuel System, Turbocharged, Charge Air Cooled 

• Reduced Emissions: Enhanced after-treatment system to meet stringent CPCB IV+ norms.
• Enhanced Serviceability: 500-750 hours/1 year service interval.
• Compact Design: Designed for higher power-to-weight ratio.
• Advanced Control: Provides real-time, remote monitoring and diagnostics.
• Warranty: 2 years or 5000 hours (depending on supplier).
• Best-in-class Fuel Efficiency: Improved performance even at part loads. 

• Engine Model: Cummins X3.6-G3
• Prime Rating: 58.5 kVA / 46.8 kW
• Engine Power: 74.4 BHP (55.5 kW) @ 1500 RPM
• Configuration: 4 Cylinder, In-line, 4-stroke, Turbocharged-Aftercooled
• Governor: Electronic Type
• Bore x Stroke: 95 x 127 mm
• Fuel Type: High-Speed Diesel (HSD)
• Fuel Consumption:  Liters/hr at 100% load
• Fuel Tank Capacity: ~160-163 Liters
• Oil Sump Capacity: 9 Liters 

• Voltage: 415V, 3 Phase, 4 Wire
• Power Factor: 0.8 lagging
• Insulation/Protection: Class H Insulation, IP 23
• Voltage Regulation:  

• Weight:  - 1570 Kg (with canopy)
• Dimensions: ~2950 x 1150 x 1550 mm ()
• Enclosure: CPCB-IV+ Approved, Soundproof, Powder Coated

• Engine: Cummins QSL9-G20 (6 cylinders, inline, 4-stroke, turbocharged, after-cooled).
• Capacity: 320 kVA / 256 kWe.
• Fuel Consumption: Approx. 54.89 L/hr at 75% load and 70.52 L/hr at 100% load.
• Engine Speed: 1500 RPM.
• Governing Class: Electronic / A1.
• Alternator: Stamford HCI444D (Brushless, Class H insulation, IP23).
• Cooling System: Liquid cooled (EG Compleat 50:50).
• Fuel Tank Capacity: ~515 liters.
• DEF Tank Capacity: ~60 liters.
• Typical Dimensions: 5000 X 1500 X 2465 mm (LxWxH).
• Weight: ~4530 kg (wet weight, enclosed). 

• Emission Norms: CPCB-IV+.
• Noise Level: 75 dBA at 1 meter at 75% load.
• Control Panel: Microprocessor-based RMS panel, 24V DC.
• Service Interval: 500 Hours / 1 Year.
• Applications: Construction, Residential, Industrial, Hospitals, Commercial.

• Engine: Cummins QSM15-G1, 6-cylinder, In-line, Water-cooled, 1500 RPM.
• Engine Power: ~587-594 BHP (approx. 447-450 kWm).
• Alternator: Stamford (CGT), Class H insulation, 3-phase.
• Fuel Consumption: Approx. 79-84 Litres/hr at 75% load.
• Noise Level:  75 dBA at 1 meter (CPCB IV compliant).
• Dimensions (Approx): 5300 mm (L) x 1900 mm (W) x 2490 mm (H).
• Wet Weight: ~5900 - 6500 kg.
• Controller: Advanced digital controller (e.g., PS0602) with remote monitoring. 

• Emission Control: Uses SCR (Selective Catalytic Reduction) with DEF (Diesel Exhaust Fluid) for near-zero .
• Service Interval: 500 hours or 1 year.
• Applications: Ideal for data centers, hospitals, and industrial, commercial sites requiring reliable, eco-friendly power.
• Warranty: Typically 2 years or 5000 hours (5 years on 5C parts)

• Engine: Cummins QSK19 Series (4-stroke, turbocharged, aftercooled).
• Power Output: 650 kVA / 520 kWe (Prime Rating).
• Fuel Consumption:  L/hr (at 75% load) to  L/hr (at 100% load).
• Engine Displacement:  Liters.
• Alternator: Stamford / Cummins Make (Class H insulation, IP23 Protection).
• Emission Norms: CPCB IV+.
• Starting System: 24V DC Electrical.
• Fuel Tank Capacity:  -  Liters.
• Weight:  kg (Engine+Radiator) to  kg (Approx. with enclosure).
• Dimensions (Approx.):  (LWH)

ENGINE MODEL – 3R1040TG1, WATER COOLED, BHP 42 @ 1500 RPM, 3 CYLINDER. ALTERNATOR : KIRLOSKAR GREEN, 3 PH, 415V, 0.8